Q6 Antenna Structure

Revision as of 04:37, 2 February 2007 (edit)
Paul (Talk | contribs)

← Previous diff
Revision as of 04:39, 2 February 2007 (edit)
Paul (Talk | contribs)

Next diff →
Line 3: Line 3:
The first shipment of Gemini equipment - included the FPQ-6 antenna pedestal its heaviest item - arrived in November 1966 and was transported to Carnarvon. An 80-ton crane - the largest vehicle then to have used the North West Coastal Highway - travelled north to lift the pedestal into position. The first shipment of Gemini equipment - included the FPQ-6 antenna pedestal its heaviest item - arrived in November 1966 and was transported to Carnarvon. An 80-ton crane - the largest vehicle then to have used the North West Coastal Highway - travelled north to lift the pedestal into position.
-As befitting a precision instrument, the [[Tracking Antenna Mounts]] antenna structure and 8.8m (29ft) parabolic dish was erected upon a specially designed rigid foundation; a thick concrete base which had been poured onto several foundation piles driven 10 metres into one ancient sand dune on Browns Range. +As befitting a precision instrument, the [[Tracking Antenna Mounts| Azimuth-Elevation]] antenna structure and 8.8m (29ft) parabolic dish was erected upon a specially designed rigid foundation; a thick concrete base which had been poured onto several foundation piles driven 10 metres into one ancient sand dune on Browns Range.
A NASA Technical Information Bulletin announcing the imminent construction stated:<BR> A NASA Technical Information Bulletin announcing the imminent construction stated:<BR>

Revision as of 04:39, 2 February 2007


FPQ-6 Radar

Back to Station Equipment

The first shipment of Gemini equipment - included the FPQ-6 antenna pedestal its heaviest item - arrived in November 1966 and was transported to Carnarvon. An 80-ton crane - the largest vehicle then to have used the North West Coastal Highway - travelled north to lift the pedestal into position.

As befitting a precision instrument, the Azimuth-Elevation antenna structure and 8.8m (29ft) parabolic dish was erected upon a specially designed rigid foundation; a thick concrete base which had been poured onto several foundation piles driven 10 metres into one ancient sand dune on Browns Range.

A NASA Technical Information Bulletin announcing the imminent construction stated:
“The antenna pedestal is a precision, two-axis mount, using hydrostatic bearing in azimuth and phase roller bearings in elevation to provide mobility and support to the counter-balanced, solid-surface antenna. The antenna is positioned through anti-backlash dual-drive pedestal gearing via a high torque-to-inertia electro-hydraulic valve motor system. … A viscous coupler located between the valve motor and pedestal drive gearing damped out undesired mechanical resonances.” [1]

Put simply, the whole 30-ton pedestal, plus the dish, floated and rotated on a thin film of hydraulic oil that covered the shallow dome beneath it, which in turn sat atop the huge mass of concrete.

Personal tools