VERLORT Radar

Revision as of 07:27, 8 May 2007 (edit)
Paul (Talk | contribs)

← Previous diff
Revision as of 07:38, 8 May 2007 (edit)
Paul (Talk | contribs)

Next diff →
Line 1: Line 1:
 +[[Image:muc-verlort.jpg|right|thumbnail|190px|The VERLORT radar at Muchea:<BR>''Photo - ???'']]
 +
 +The '''VER'''y '''LO'''ng '''R'''ange '''T'''racking (VERLORT) radar was an extended-range version of the '''SCR-584''', and was often credited as "the radar that won WW II". The range was increased from 650 Km to 4000 Km and the dish diameter from 1.8 m to 3 m to give the radar space tracking capabilities. The Red Lake (Woomera) Mercury tracking station used the more accurate AN/FPS-16 radar installed at Woomera for previous space activities.
 +
 +The VERLORT radar performed reliably for the six Mercury orbital missions. It was then relocated to the new Gemini tracking station at Carnarvon as an acquisition aid and back-up for the even more accurate FPQ-6 radar installed there. Although the VERLORT was kept operational for the first few Carnarvon missions it was soon not required because the FPQ-6 was very reliable and other acquisition methods proved sufficient.
 +
 +[[Image:cro-verlort.jpg|left|thumbnail|180px|The VERLORT radar reinstalled at Carnarvon just beside the AcqAid antennas:<BR>''Photo - Alan Gilham'']]
 +
==Some technical descriptions== ==Some technical descriptions==
[[Image:Helical scan.jpg|right|thumbnail|150px|Helical scan mechanism: ''Image – ‘Electronics’; Fig 2, Dec ’45, p.104'']] [[Image:Helical scan.jpg|right|thumbnail|150px|Helical scan mechanism: ''Image – ‘Electronics’; Fig 2, Dec ’45, p.104'']]
Line 8: Line 16:
Even more intriguing were the target acquisition techniques. Even more intriguing were the target acquisition techniques.
-For targets where only crude position information was available, a helical scan was used to acquire. The dish was swung in a circle at 6 rpm along the expected path with the reflector tilted to and fro about 4 deg per dish revolution to create a helical spiral about 20&deg; wide along the expected track path - see 'Helical scan mechanism' diagram on right.+For targets where only crude position information was available, a helical scan was used to acquire. The dish was swung in a circle at 6 rpm along the expected path with the reflector tilted to and fro about 4 deg per dish revolution to create a helical spiral about 20 deg wide along the expected track path - see 'Helical scan mechanism' diagram on right.
-Where there was more certainty about the target path, a nutating scan mode was used where the slightly offset dipole feed was rotated rapidly to produce off-axis radiation to increase the effective beam width from 2.5&deg; to about 5.5&deg;. The nutation was switched off when the target was acquired. See ‘conical scan beam’ diagram below left and ‘nutating antenna dipole feed’ below right.+Where there was more certainty about the target path, a nutating scan mode was used where the slightly offset dipole feed was rotated rapidly to produce off-axis radiation to increase the effective beam width from 2.5 deg to about 5.5 deg. The nutation was switched off when the target was acquired. See ‘conical scan beam’ diagram below left and ‘nutating antenna dipole feed’ below right.
[[Image:Conical beam.jpg|left|thumbnail|250px|A conical scan beam:<BR> ''Image – ‘Electronics’; Fig 1, Nov ’45, p.104'']] [[Image:Conical beam.jpg|left|thumbnail|250px|A conical scan beam:<BR> ''Image – ‘Electronics’; Fig 1, Nov ’45, p.104'']]
[[Image:offset dipole.jpg|right|thumbnail|300px|Nutating antenna dipole feed:<BR>''Image – ‘Electronics’; Fig 5, Dec ’45, p.107'']] [[Image:offset dipole.jpg|right|thumbnail|300px|Nutating antenna dipole feed:<BR>''Image – ‘Electronics’; Fig 5, Dec ’45, p.107'']]
-<BR><BR><BR><BR><BR><BR><BR><BR><BR>+ 
For a detailed technical description of the SCR-584 radar published in the November & December 1945 issues of ‘Electronics’ magazine refer to http://www.hamhud.net/darts/scr584.html. For a detailed technical description of the SCR-584 radar published in the November & December 1945 issues of ‘Electronics’ magazine refer to http://www.hamhud.net/darts/scr584.html.

Revision as of 07:38, 8 May 2007

The VERLORT radar at Muchea:Photo - ???
Enlarge
The VERLORT radar at Muchea:
Photo - ???

The VERy LOng Range Tracking (VERLORT) radar was an extended-range version of the SCR-584, and was often credited as "the radar that won WW II". The range was increased from 650 Km to 4000 Km and the dish diameter from 1.8 m to 3 m to give the radar space tracking capabilities. The Red Lake (Woomera) Mercury tracking station used the more accurate AN/FPS-16 radar installed at Woomera for previous space activities.

The VERLORT radar performed reliably for the six Mercury orbital missions. It was then relocated to the new Gemini tracking station at Carnarvon as an acquisition aid and back-up for the even more accurate FPQ-6 radar installed there. Although the VERLORT was kept operational for the first few Carnarvon missions it was soon not required because the FPQ-6 was very reliable and other acquisition methods proved sufficient.

The VERLORT radar reinstalled at Carnarvon just beside the AcqAid antennas:Photo - Alan Gilham
Enlarge
The VERLORT radar reinstalled at Carnarvon just beside the AcqAid antennas:
Photo - Alan Gilham

Some technical descriptions

Helical scan mechanism: Image – ‘Electronics’; Fig 2, Dec ’45, p.104
Enlarge
Helical scan mechanism: Image – ‘Electronics’; Fig 2, Dec ’45, p.104

The SCR family of radars, developed at the MIT laboratories, was remarkable for the innovative MIT solutions to radar operations now met in modern radars using electronic methods.

The Verlort Plan Position Indicator (PPI) was driven by a mechanical computer once target acquisition occurred with the radar operator needing to keep a ‘hairline’ indicator manually centred on the target’s echo to maintain track.

Even more intriguing were the target acquisition techniques.

For targets where only crude position information was available, a helical scan was used to acquire. The dish was swung in a circle at 6 rpm along the expected path with the reflector tilted to and fro about 4 deg per dish revolution to create a helical spiral about 20 deg wide along the expected track path - see 'Helical scan mechanism' diagram on right.

Where there was more certainty about the target path, a nutating scan mode was used where the slightly offset dipole feed was rotated rapidly to produce off-axis radiation to increase the effective beam width from 2.5 deg to about 5.5 deg. The nutation was switched off when the target was acquired. See ‘conical scan beam’ diagram below left and ‘nutating antenna dipole feed’ below right.

A conical scan beam: Image – ‘Electronics’; Fig 1, Nov ’45, p.104
Enlarge
A conical scan beam:
Image – ‘Electronics’; Fig 1, Nov ’45, p.104
Nutating antenna dipole feed:Image – ‘Electronics’; Fig 5, Dec ’45, p.107
Enlarge
Nutating antenna dipole feed:
Image – ‘Electronics’; Fig 5, Dec ’45, p.107

For a detailed technical description of the SCR-584 radar published in the November & December 1945 issues of ‘Electronics’ magazine refer to http://www.hamhud.net/darts/scr584.html.

Personal tools