RARR Antennas and Tracking
Revision as of 07:33, 2 January 2007 (edit) Paul (Talk | contribs) ← Previous diff |
Revision as of 07:40, 2 January 2007 (edit) Paul (Talk | contribs) Next diff → |
||
Line 16: | Line 16: | ||
Angle<BR> | Angle<BR> | ||
- | [[The Science of Tracking#Angle:_Relative-phase_measurement|(read more detail)]] | + | [[The Science of Tracking#Angle:_Relative–phase_measurement''|(read more detail)]] |
Revision as of 07:40, 2 January 2007
- Antennas and tracking
- Telemetry and command
- Darwin sub-station
- Location Project
- Support highlights
- Mission Profile
Back to Station Equipment
The GRARR VHF and S-band antennas were driven by identical hydraulically-powered X-Y mounts with digital angle encoders accurate to ±0.1°.
The VHF antenna was a 8.4m (28ft) square array of cavity-backed slots operating on about 150Mc. The array was later upgraded to backward-scatter dipoles. The antenna had a beamwidth of 16° and was often used as an acquisition aid for the narrower beamwidth S-band antenna.
The S-band antenna consisted of twin 4.2m (14ft) parabolic dishes operating on around 2500Mc with a beamwidth of 2.5°. One dish transmitted and the other received; the separation of transmit and receive functions decreased noise feedback on the receive dish. Both VHF and S-band antennas had 10Kw transmitters.
Range tones
(read more detail)
Range Rate
(read more detail)
Angle
[[The Science of Tracking#Angle:_Relative–phase_measurement|(read more detail)]]